Baijian Testing is a third-party testing agency that provides enterprises with relevant CNAS, CMA, CAL and other qualification certification testing reports. We always take the enterprise as the first and customer as the center, carry out testing work under strict procedures, provide customers with product testing and quality control solutions, and wholeheartedly provide scientific and scientific inspection, research and development analysis services for our customers
Display Style: Electronic Version
Testing Cycle: 3-15 working days (can be expedited)
Report Qualification: CNAS, CMA, CAL, etc.
Testing Items:
Ribbon Density, Ribbon Breaking Strength, Ribbon Length and Width, Belt Buckling Force, Full Thickness Tensile Strength, Reference Force Elongation, Tensile Strength and Elongation, Tensile Elongation at Break, Tear Strength, Automotive Synchronous Belt Physical Performance Test, Fatigue Test, Adhesive Strength, V-belt Wheel (Reference Width System) Groove Inspection, Chlorinated Hydrocarbon Content, Benzene Content, All Parameters, Tensile Strength, Breaking permanent deformation, low-temperature test, opening force (after dynamic test), opening force, strength test, durability test, dielectric loss, bending, tensile, electrical strength, center to center distance change, tensile strength, elongation, fatigue performance, some parameters, mica content, thickness, temperature characteristics of dielectric loss factor at power frequency, voltage characteristics of dielectric loss factor at power frequency, volatile content, glass cloth content, gelation time, adhesive content, film content, all parameters *, fiber geometry parameters, fiber ribbon transmission performance, fiber ribbon size parameters, fiber ribbon mechanical performance, fiber ribbon identification, fiber ribbon environmental performance, fiber ribbon length, breaking load, Open test, load test, partial and all items, cladding diameter, cladding non circularity, core/cladding concentricity error, coating diameter, cladding/coating concentricity error, mode field diameter, fiber ribbon size, fiber ribbon tearing, macro bending loss, optical continuity, temperature characteristics, dry heat performance, observation method of fiber ribbon geometric dimensions, fiber ribbon tearing (separability), temperature cycling test, core/cladding concentricity error, attenuation, fiber ribbon geometric dimensions, attenuation temperature characteristics, peel strength, opening size, handrail width, heat reduction, appearance, width, volatile content, fire resistance characteristics, buckle strap peeling strength, buckle strap peeling strength Shear strength, buckle buckle strength, buckle tear strength, buckle durability/fatigue resistance
Testing standards:
1. GB/T3686-2014 Test methods for tensile strength and elongation of V-belts and V-belts with belt drive
2. GB/T 15972.52-2008 Specification for optical fiber testing methods Part 52: Measurement methods and testing procedures for environmental performance - Temperature cycling
3. GB 16899-2011 EN 115-1:2008+A1:2010 Safety Specification for Manufacturing and Installation of Escalators and Moving Walkways 7.3.2
4. JSB40.1-1993 Military Silk Buckle Belt Buckle Strength Test Method
5. GB/T 10716-2012 Automotive Synchronous Belt Physical Performance Test
6. GB/T 3688-1998 Adhesive Strength
7. FZ/T 63005-2019 Woven Belt 6.8
8. T/CEA 301-2020 Technical Specification for Subway Escalators 5.5.7.1
9. IEC 60794-1-23:2012 Optical Cable - Part. Part 1-23: General specifications - Basic test procedures for optical cables - Test methods for optical cable components
10. GB 14166-2013 Motor vehicle passenger safety belts, restraint systems, child restraint systems, and ISOFIX child restraint systems 4.2.2.3
11. GB/T14905-2020 Rubber and plastic hoses - Determination of interlayer adhesion strength
12. YD/T 979-2009 Technical requirements and inspection methods for optical fiber tapes
13. FZ/T 63005-2019 woven waist belts FZ/T 63005-2019
14. JXUB2137-2012 07 split raincoat Specification Appendix F
15, GB/T15328-2019 General V-belt Fatigue Test Method without Torque
16, GB/T 23315-2009 Adhesive Buckle 6.1
17 GB/T 15972.21-2008 Specification for Optical Fiber Test Methods Part 21: Measurement Methods and Test Procedures for Dimensional Parameters - Geometric Parameters of Coating Layer
18, IEC 60598-2-21:2014 EN 60598-2-21:2015 AS/NZS 60598.21:2018 Safety Requirements for Lamp Strings
19, GB/T 15972.20-2008 Specification for Optical Fiber Test Methods Part 20: Measurement Methods and Test Procedures for Dimensional Parameters - Geometric Parameters of Optical Fiber
20, GB/T 1408.1-2016 Test Methods for Electrical Strength of Insulating Materials Part 1: Tests at Power Frequency
Detection and Detection Characteristics:
1 Full coverage of the testing industry to meet different testing needs 2. Fully cover the laboratory and allocate localized testing nearby
3. Engineer one-on-one service to make testing more accurate
4. Free initial inspection, no testing fee charged for initial inspection
5. Self service ordering and express delivery for free on-site sampling 6. Short cycle, low cost, and thoughtful service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative, effective, and universally applicable domestically