How to do the test report? Why do you need to do product inspection? Third-party testing institutions provide product testing services in various industries, and there are many cooperative laboratories across the country, mainly serving companies, enterprises, individual businesses, universities and scientific research.
Report qualification: CNAS, CMA, CAL, etc
. Presentation style: electronic
version of the testing cycle: 3-15 working days (expedited can be expedited)
Testing cost: Quotation according to customer needs and experimental complexity
Sample size: Choose to send samples or visit the door according to the sample size
The wooden part of GB 2099 is suitable for indoor or outdoor use, household and similar purposes. It is only used for AC power, with a rated voltage of 50 V or above but not exceeding 440 V and a rated current of not exceeding 32A. It is suitable for plugs and fixed or mobile sockets with or without grounding contacts. For fixed sockets equipped with threaded terminals, the rated current * is only limited to 16 A. This section does not include the requirements for concealed installation boxes: it only includes the requirements for exposed installation boxes that are necessary for testing sockets. Note 1. The general requirements for installation boxes are given in GB 17466. This section also applies to plugs installed in wire assemblies and plugs and mobile sockets installed in wire extension assemblies. This section also applies to plugs and sockets as a component of electrical appliances, unless otherwise specified in relevant electrical standards. The wooden part is not applicable to: - industrial plugs, sockets, and couplers; - Appliance coupler; - ELV (extra low voltage) plug and fixed or mobile socket. Note 2. ELV The value of ultra-low voltage is specified in GB 16895.21. - Fixed sockets combined with fuse links, automatic switches, etc. Note 3. If the indicator light on the socket meets relevant standards, this part applies to sockets with indicator light. Plugs and fixed or mobile sockets that comply with this part are suitable for use in ambient temperatures usually not exceeding 35 ℃, occasionally reaching 40 ℃ I. Note 4: Sockets that comply with the requirements of this part are only suitable for use in The installation method and location cannot be used in equipment with an ambient temperature exceeding 40C around the socket. In places with special conditions, such as ships, vehicles, and hazardous areas where explosions may occur, special structures may be required. 2 Normative References: The clauses in the following documents are referred to in this part of GB 2099 and become the clauses of this part. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions are not applicable to this section. However, parties who have reached agreements based on this section are encouraged to study whether new versions of these documents can be used. For undated references, the new version of * applies to this section. GB 1002 Single phase plug and socket types for household and similar purposes - Basic parameters and dimensions GB 1003 Three phase plug and socket types for household and similar purposes - Basic parameters and dimensions GB/T 2423.4-1993 Basic environmental testing procedures for electrical and electronic products, test Db: Alternating damp heat test method (eqv IEC60068-2-30: 1980) GB/T 2423.8-1995 Environmental testing for electrical and electronic products, Part 2; Test method, test Ed; Free fall (idt IEC6O068-2-32:1975+A1+A2; 1990) GB 2900,70-2008 Electrotechnical Terminology Electrical Accessories (IEC 60050-4421998, IDT), Create an innovative testing platform for the industry. If you have any needs, please contact 18501763637
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems100% inspection and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in Chinarole of the test report:
1. Project bidding: issue an authoritative third-party CMA/CNAS qualification report;
2. Online e-commerce platform entry: quality inspection report recognized by major e-commerce platforms;
3. Used as a sales report: issue a test report with legal effect to make consumers more assured;
4. Papers and scientific research: provide professional personalized testing needs;
5. Judicial services: provide scientific, fair and accurate testing data;
6. Diagnosis of industrial problems: verification and correction of problems in industrial production;