List of relevant testing items of 100 inspectionsThird-party testing institutions support sample sending and door-to-door testing, mainly providing sample testing services for companies, enterprises, public institutions, individual businesses, and university scientific research, and reporting CMA/CNAS/CAL qualifications, which are true and effective.
Report qualification: CNAS, CMA, CAL, etc
. Presentation style: electronic
version of the testing cycle: 3-15 working days (expedited can be expedited)
Testing cost: Quotation according to customer needs and experimental complexity
Sample size: Choose to send samples or visit the door according to the sample size
Our company can handle street lamp SASO2927 energy efficiency, lamp SASO2870, lamp SASO2902 energy efficiency, LED lamp GB30255 China energy efficiency, LED flat panel lamp GB38450 China energy efficiency, LED street lamp tunnel lamp GB37478 China energy efficiency, lamp IES test, lamp LM79 test, lamp bead LM80 test, lamp TM21 life prediction test, lamp ISTMT temperature rise test, lamp EU1194/2012 energy efficiency test, lamp EU2019/2020 energy efficiency test, lamp ERP test IEC62722, IEC62717, and other domestic and international lamp performance and energy efficiency tests
The scope of 3C certification products for lamps is as follows:
Lighting equipment belonging to the following scope belongs to the 3C mandatory product certification category, 3C certification must be obtained
(1) Embedded lighting fixtures
(2) Fixed universal lighting fixtures
(3) Portable universal lighting fixtures
(4) Aquarium lighting fixtures
(5) Night lights installed with power sockets
(6) Ground embedded lighting fixtures
(7) Ballasts for tubular fluorescent lamps
(8) AC electronic ballasts for tubular fluorescent lamps
(9) Discharge lamps (excluding tubular fluorescent lamps) Ballasts
(10) DC or AC electronic ballasts for discharge lamps (excluding fluorescent lamps)
(11) DC or AC electronic control devices for LED modules
Details of 3C certification for lamps 1. Product manual 2. Product specifications 3. Product maintenance manual 4. Product circuit diagram (including schematic diagram and printed brush circuit layout) 5. Explanation of the differences between the main delivery model product and the coverage model product in the same application unit 6. List of key components related to product safety and a list of main components that have an impact on electromagnetic compatibility performance 7. Copy of certification certificate for key safety components of the product 8. CB test certificate and report of the product (if any) 9. Authorization letter for trademark use of the product (if any)
The ERP energy efficiency test report for floor lamps has these requirements:
1. Notebooks or other similar mobile devices used for configuring and diagnosing industrial equipment 2. There are special non-standard computer interfaces and industrial fieldbus communication cards, such as various measurement, analysis, and acquisition cards customized by suppliers, which are not within the scope of instructions
3. Clearly specify that computer monitors below 9 inches, with two or more screens and all screen sizes below 9 inches, are not within the command range. Computer monitors with idle mode power less than 6W are also not within the instruction range (turning off the screen during testing), and this definition only applies to laptops. Desktops with idle mode power less than 6W, integrated desktops, desktop thin clients, etc. are within the instruction range Products covered by (EU) No617/2013 no longer need to meet the requirements of standby regulation (EC) No1275/2008 and subsequent (EU) No801/2013 5. External power supplies that meet the conditions of (EC) No278/2009 in computer display products should still comply with the requirements of the External Power Regulations
The process for processing the floor lamp ERP energy efficiency test report:
1. Compliance assessment. According to the ErP directive requirements, manufacturers can choose one of the two assessment modes of "internal design control" or "environmental management system" for evaluation 2. Organize and form technical documents (TDFs), and manufacturers must form technical documents; Technical documents should include information on design, manufacturing, operation, and final disposal of products; The details will be clarified through the implementation measures of each product 3. Publish a Declaration of Conformity (DoC), basic information; Instructions and standards to be followed 4. Labeling with CE marks, coordinating standard testing - EMC, LVD, etc. Labeling with CE marks
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems100% inspection and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in ChinaBaijian is a comprehensive testing service platform, bringing together many CNAS, CMA, CAL and other qualification testing institutions all over the country.