Scope of Test Method 1 for Three Phase Synchronous Motors This standard specifies the test methods for three phase synchronous motors. This standard applies to synchronous motors, generators, and synchronous condensers with a rated power of 1 kW (kVA) and above. Not applicable to synchronous motors without DC excitation windings, but can be used for testing synchronous motors powered by static variable frequency power sources. 2 Normative References: The clauses in the following documents become the clauses of this standard through the reference surface of this standard. For dated reference documents, all subsequent amendments (excluding erroneous content) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this standard. GB 755-2000 Rating and Performance of Rotating Electrical Machines (idt IEC 60034-1:1996) GB/T 5321 Determination of Loss and Efficiency of Large AC Motors by the Calorimetric Method (GB/T 5321-1985, neq TEC 60034-2A: 1974) GB/T 7409.3 Technical Requirements for Excitation Systems of Large and Medium Synchronous Generators GB 10068 Mechanical Vibration of Machines with a Shaft Center Height of 56 mm and Above: Measurement, Evaluation, and Limits of Vibration (GB 10068-2000) Idt IEC 60034-14:1996) GB/T 10069.1 Measurement Methods and Limits for Noise of Rotating Electrical Machines Engineering Measurement Methods GB/T 10069.2 Measurement Methods and Limits for Noise of Rotating Electrical Machines Simple Measurement Methods GB/T 10585 Basic Technical Requirements for Excitation Systems of Small and Medium Synchronous Motors GB/T 15548- General Technical Conditions for Three-phase Synchronous Generators Driven by Reciprocating Internal Combustion Engines JB/T 6227 Sealing Test Methods and Evaluation of Hydrogen Cooled Motors JB/T 7836.1 Electric Heaters for Electric Motors Technical conditions JB/T 8445 Test method for bearing capacity of negative sequence current of three-phase synchronous generators JB/T 8446 Measurement method for inter turn short circuit of rotor of hidden pole synchronous generators JB/T 8990 Dynamic characteristics and vibration test method and evaluation of stator winding end of turbogenerator JB/T 9615.1 Test method for inter turn insulation of scattered embedded winding in AC low-voltage motors JB/T 9615.2 Test limits for inter turn insulation of scattered embedded winding in AC low-voltage motors JB/T 10098 Formed wire of AC motor stator Loop withstand voltage level (JB/T 10098-2000, idt IEC 60034-15:1995) JB/T 10500.1 Buried thermal resistors for electric motors - Part 1: General provisions, measurement methods and inspection rules IEC 60034-2 Rotating electrical machines - Part 2: Test methods for losses and efficiency IEC 60034-4 Rotating electrical machines - Part 4: Parameter test methods
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China