LED tubes will not cause additional UV, blue light, or other damage to the user's product. IEC/EN 60598-1 General Safety Requirements for Luminaires Version Update In May 2014, the General Safety Requirements for Luminaires IEC 60598-1:2014 (8th edition) standard was officially published and released, replacing the previous version of IEC 60598-1:2008 (7th edition); In January 2015, the corresponding EN standard EN 60598-1:2015 also came into effect and will officially replace the previous version of EN 60598-1:2008+A11:2009 on October 20, 2017. Main update content 1. Standard updates: Based on the structural characteristics of different products, some IEC/EN 60598-2 standards have been updated. 2. Focusing on LED lighting fixtures, safety requirements for the optics, electrical, and structure of LED lighting fixtures have been added. 3. Updated some testing requirements for Class III products. Specific update project 1) Based on the above three aspects, the updates for the standard mainly include: a) IEC/EN 60598-2-6 (tungsten filament lamps with built-in transformers): will be cancelled after the new version of the standard takes effect, and all tests have been included in the new version of IEC/EN 60598-1. b) The new version of IEC/EN 60598-2-20 (Lamp Strings): 2015-09-30, officially published, will only be applicable to ordinary lamp strings and will no longer include sealed water pipe lamps (Rope Light). c) IEC/EN 60598-2-21 (Sealed Water Pipe Lamp Rope Light): The requirements for water pipe lamps were separated from the original lamp string standard and officially published as a separate standard on September 30, 2015. 2) The updated requirements for LED lighting fixtures mainly include: a) based on the particularity of LED and other light sources, dividing light sources into ordinary replaceable light sources, non replaceable light sources, and user non replaceable light sources; And there are different labels, instructions, and structural requirements for different types of light sources. b) Added clear hazard level requirements (RG0/RG1/RG2/RG3) for blue light damage caused by LED light sources; And based on different hazard levels, there are corresponding labels, instructions, and installation requirements for fixed lighting fixtures. 3) The updates for Class III products mainly include: a) adding insulation requirements between circuits of different voltage levels in controller lamps including transformers/drivers. b) Relaxed the external wire diameter requirements for Class III lighting fixtures or Class III structures in lighting fixtures. c) Exempted from the creepage distance and electrical clearance requirements for lines with operating voltages not exceeding 25Vr. m.s. or 60Vd. c
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China