Safety requirements for LED modules for general lighting: Scope 1 This standard specifies the general and safety requirements for LED modules for general lighting: LED modules without integral control devices operating at constant voltage, constant current, or constant power; - Self ballasted LED modules using a DC power supply below 250 V or a AC power supply below 1 000 V at 50 Hz or 60 Hz. Note 1: The safety requirements for individual control devices are specified in GB 19510.14. Its performance requirements are specified in GB/T 24823. Note 2: The requirements for LED modules (self ballasted lamps) with integral control devices and lamp caps (replacing existing lamps with the same lamp cap) for general lighting purposes are specified in IEC 60968 (a revised or expanded version of this IEC standard is currently being prepared). The requirements for LED modules (white ballast lamps) with integral control devices and lamp caps (replacing existing lamps with the same lamp cap) for non power voltage, general lighting are currently being studied. Note 3: The two types of LED modules (with and without integrated control devices) mentioned in the requirements of this standard are represented by the term "module". If it only refers to LED modules without integral control devices, the term "LED module" is used. 2 Normative References: The clauses in the following documents become clauses of this standard through reference in this standard. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this standard. GB 19510.1-2009 Lamp Control Gear Part 1: General and Safety Requirements (IEC 61347-1:2007, 1DT) GB 19510,14-2009 Lamp Control Gear Part 14: Special Requirements for DC or AC Electronic Control Gear for LED Modules (IEC 61347-2-13:2006, IDT) GB 19651.3-2008 Miscellaneous Lamp Holders: Part 2-2: Special Requirements for Connectors for LED Modules (IEC 60838-2-2:2006, 1DT) IEC 60598-1:2003 Luminaires Part I: General Requirements and Testing and Amendment 1 (2006). IEC62471:2006 Photobiological Safety of Lamps and Lamp Systems IS () 4046-4; 2002 Paper, board, pulp and their terminology and vocabulary Part 4: Grades and processed products of paper and board
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China