Safety requirements for self ballasted LED lamps above 50V for general lighting: Scope 1: This standard specifies LED lamps (self ballasted LED lamps) that integrate stable ignition components into a single unit for general lighting in households and similar fields. This standard specifies safety and interchangeability requirements for this type of lamp, as well as test methods and conditions for checking its conformity. The scope of application is as follows: - Rated power below 60W—— Rated voltage greater than 50 V and less than or equal to 250 V;. The requirements of this standard only involve type testing. The inspection methods for all products and batch products will be defined in Appendix C of GB AAAAA "Safety Requirements for LED Modules for General Lighting". Note: The term "lamp" appearing in this standard represents "self ballasted LED lamp", unless otherwise specified as another type of lamp. 2 Normative References: The clauses in the following documents become clauses of this standard through reference in this standard. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this standard. GB/T5169.10-2006 Fire Hazard Testing for Electrical and Electronic Products - Part 10: Basic Test Methods for Glow Wire/Hot Wire - Glow Wire Devices and General Test Methods (IEC 60695-2-10:2000, IDT) GB/T 5169.11-2006 Fire Hazard Testing for Electrical and Electronic Products - Part 11: Glow Wire/Hot Wire Basic Test Methods - Glow Wire Flammability Test Method for Finished Products (IEC 60695-2-11:2000, IDT) GB/T 5169.12-2006 Fire Hazard Testing for Electrical and Electronic Products - Part 12: Glow Wire/Hot Wire Basic Test Method - Glow Wire Flammability Test Method for Materials (IEC 60695-2-12:2000, IDT) GB/T 5169.13-2006 Fire Hazard Testing for Electrical and Electronic Products - Part 13: Glow Wire/Hot Wire Basic Test Method - Glow Wire Ignition Test Method for Materials (IEC 60695-2-13:2000, IDT) GB 7000.1 Luminaires - Part 1: General Requirements and Tests (GB 7000.1-2007, IEC 60598-1:2003, IDT) GB 14196.1 Safety requirements for halogen tungsten lamps for household and similar lighting purposes (GB 14196.1-200 ×， IEC 60432-1:2005, IDT)
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China