Digital Addressable Lighting Interface - Part 101: General Requirements - System 1 Scope - This part of GB/T 30104 specifies the digital signal control protocol for electronic lighting equipment powered by AC/DC power sources. The following normative references are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all modification orders) applies to this document. GB/T 30104102-2013 Digital Addressable Lighting Interface - Part 102: General Requirements - Control Devices (IEC 62386-102:2009, 1DT) IEC 60598-1 Luminaires - Part 1: General Requirements and Tests (Luminaires Part 1: General Requirements and Tests) IEC 60669-2-1:2002 Switches for Household and Similar Fixed Electrical Installations - Part 2-1: Special Requirements, Electronic Switches, Amendment 1 (2008) IEC 61347-2-3:2000 Lamp Control Devices, Part 2-3; Special requirements for AC electronic ballasts for fluorescent lamps (Lampcontrolgear Part 2-3: Partial requirements for a.c. supplied electronic ballasts for fluorescentlamps) 3 Terms and definitions The following terms and definitions apply to this document. 3.1 Control device is connected to a device on an interface and used to send instructions to control other devices connected to the same interface (such as a light control device). 3.2 Control gear is a component or components connected between the power supply and one or more lights to change the power voltage, limit the current of the lights to a specified value, provide starting voltage and preheating current, prevent cold start, correct power factor, or reduce radio interference. Note: The control device is connected to the interface to receive instructions and control at least one output directly or indirectly. 3.3 The master device is a device that controls data flow through an interface. 3.4 Slave devices are devices used to respond to instructions. Note: Slave devices cannot control data flow through interfaces
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China