This part of GB7000 specifies the safety requirements for lamps with movable bases used in places such as gardens and movable lamps used in flower beds. These lamps use electric light sources with a power supply voltage not exceeding 250 V. This part is used in conjunction with relevant chapters of GB 7001. 2. General test requirements shall apply Chapter 0 of GB7000.1, and the tests described in the corresponding chapters of GB7000.1-2007 shall be carried out in the order listed in this section. 3. Terms and definitions shall apply the definitions in Chapter 1 of GB7000.1. 4. Classification of Luminaires: Luminaires should be classified according to the requirements of Chapter 2 and 4.1~4.2 of GB 700.1. 4.1 According to the classification of electric shock protection types, movable lighting fixtures for gardens should be classified as Class I, Class Il, or Class Chuan. 4.2 According to the classification of dust and water resistance levels, portable lighting fixtures for gardens should be of the waterproof, splash proof, spray proof, or watertight type. The 5 markings shall comply with the provisions of Chapter 3 of GB7000.1. 5.1 The maximum power calculated from the maximum rated current of the power cord should be marked near the power socket installed on the lamp. 6. Structural application GB 700.1 Chapter 4 and below 6 Requirements from 1 to 6.7. 6.1 Flexible cable carriers and clamps should be made of insulating materials. Otherwise, when they are easily accessible or come into contact with easily accessible metal components, a fixed insulation lining should be provided. Conformity is subject to visual inspection. 6.2 Portable lighting fixtures for gardens should have sufficient stability. The qualification is checked by the following method: placing the lamp in the most unfavorable position for normal use on a flat plate, with an inclination angle of 15 ° between the flat plate and the horizontal plane. The surface of the flat plate should ensure that the lamp does not slide. Luminaires should not be overturned. Luminaires that are clamped with clamps, pins, or similar devices do not need to withstand the above tests. 6.3 A certain method should be provided so that the flexible cable or cord connecting the lamp to the power supply will not be damaged in any possible normal use position. The position or protection of the flexible cable entrance should be able to prevent harmful effects from soil splashed from the ground. Conformity is verified by visual inspection and installation testing (if required). Note: For example, the blocking plate on the nail on the ground can be used to meet this requirement by having a distance of at least 10 em from the ground to the cable population. 6.4 GB 7000.1 4 6 does not apply to this section. 6.5 There should be no more than two cable entries for portable lighting fixtures used in the garden. Conformity is subject to visual inspection