This part of the scope GB 1094 applies to the following reactors: - Shunt reactors; --- Series reactors, including current limiting reactors, neutral grounding reactors, power control reactors, motor starting reactors, and arc furnace series reactors; - Filter (tuning) reactor; - Capacitor damping reactor; - Capacitor discharge reactor; - Grounding transformer (neutral point coupler); - Arc suppression coil: - High voltage direct current transmission and industrial smoothing reactor. Except for the following reactors—— Single-phase reactors with a rated capacity of less than 1 kvar and three-phase reactors with a rated capacity of less than 5 kvar; -- Various specialized reactors, such as high-frequency line arresters or reactors installed on railway vehicles. If there are no corresponding standards for small reactors or specialized reactors, all or part of this section may apply. The following normative references are essential for the application of this document. Any dated references without identification results are applicable to this document. For undated references, the latest version (including all modification orders) applies to this document. GB 1094.1-1996 Power Transformers Part 1; General Provisions (eqv IEC 60076-1; 1993) GB 1094.2 Power Transformers: Part 2: Temperature Rise (GB 1094.2-1996. eqv IEC 60076-21993) GB 1094.3-2003 Power Transformers: Part 3; Insulation level Insulation Testing and External Insulation Air Gap (eqvIEC 60076-3:2000) GB/T 1094,4-2005 Power Transformers: Part 4: Guidelines for Lightning Impulse and Switching Impulse Testing of Power Transformers and Reactors (IEC 60076-4:2002, MOD) GB 1094.5-2008 Power Transformers, Part 5: Ability to withstand short circuits (IEC 60076-5; 2006, MOD) GB/T 1094,7 Power Transformers - Part?: Load Guidelines for Oil Immersed Power Transformers (GB/T 1094.7-2008, IEC 60076-7:2005, MOD) GB/T1094.10-2003 Power Transformers: Part 10: Determination of Sound Levels (IEC 60076-10; 2001. MOD) GB 1094.11-2007 Power Transformers: Part 11; Dry type transformers (IEC 60076-11, 2004, MOD) GB/T 4109 Insulating sleeves for AC voltages above 1000 V (GB/T 4109-2008. IEC 601372003, MOD) GB/T 4797.7 Classification of environmental conditions for electrical and electronic products: Natural environmental conditions - Earthquake vibration and shock (GB/T4797,7-2008,1EC 60721-2-6: 1990, 1DT) GB/T 7354 Partial discharge measurement (GB/T 7354-2003, IEC 60270:2000, 1DT) GB/T 13499-2002 Application guidelines for power transformers (IEC 60076-8; 1997, 1DT) GB/T 16927,1-1997 High Voltage Testing Techniques Part 1: General Test Requirements (eqv 1EC 60060-1:1989)
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China