This part of JB/T 5082 specifies the terms and definitions, typical structures, technical requirements, inspection methods, inspection rules, markings, packaging, transportation, and storage of dry cast iron cylinder liners for internal combustion engines. This section applies to dry cast iron cylinder liners (hereinafter referred to as cylinder liners) for reciprocating piston internal combustion engines with a cylinder diameter not exceeding 150 mm. The following normative references are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all modification orders) applies to this document. GB/T 223 (All Parts) Methods for Chemical Analysis of Steel and Alloy GB/T 228.1 Metallic Materials Tensile Testing Part 1: Room Temperature Testing Methods GB/T 230.1 Metallic Materials Rockwell Hardness Testing Part 1: Test Methods (A, B, C, D, E, F, G, H, K, N, T Scales) GB/T 231.1 Metallic Materials Brinell Hardness Testing Part 1: Test Methods GB/T 1800.1 Geometrical Product Specifications (GPS) Limits and Fits, Part 1: Tolerances Basis of Deviation and Fit GB/T 1184 Shape and Position Tolerances without Individual Tolerance Values GB/T 1958-2004 Geometrical Product Specifications (GPS) for Shape and Position Tolerances, Inspection Regulations GB/T 2828.1 Sampling and Inspection Procedures by Attribute: Part 1: Sampling Plan for Batch Inspection Retrieved by Acceptance Quality Limit (AQL) GB/T 3821 Cleanliness Limits and Measurement Methods for Small and Medium Power Internal Combustion Engines GB/T 10610 Geometrical Product Specifications (GPS) Surface structure: Rules and methods for evaluating surface structure using the contour method JB/T 5082.1 Internal combustion engine cylinder liners Part 1: Boron cast iron metallographic examination JB/T 5082.2 Internal combustion engine cylinder liners Part 2: High phosphorus cast iron metallographic examination JB/T 5082.7 Internal combustion engine cylinder liners Part 7: Platform honing mesh technical specifications and testing methods 3 Terms and definitions The following terms and definitions apply to this document. 3.1 Thousand type cast iron cylinder liner Dry cylinder liner The cylinder liner of an internal combustion engine where the coolant does not directly come into contact with the outer surface of the cylinder liner
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China