This standard specifies the performance requirements for embedded luminaires (hereinafter referred to as luminaires) for indoor general lighting using LED as the light source and with a power supply voltage not exceeding 250 V. This standard applies to lamps that use integrated LED modules, semi integrated LED modules, non integrated LED modules, semi integrated LED lights, or non integrated LED lights. This standard does not apply to lamps using integrated LED lights. This standard does not apply to embedded LED simple lights. The following normative references are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all modification orders) applies to this document. GB/T 2423.1-2008 Environmental Testing for Electrical and Electronic Products: Part 2; Test Method - Test A; Low temperature (IEC 60068-2-1:2007, IDT) GB 7000.1 Luminaires Part 1: General requirements and tests (GB 7000.1-2007, IEC 60598-1:2003, 1DT) GB/T 9468-2008 General requirements for photometric measurement of lamp distribution GB 19510.14-2009 Lamp control gear Part 14: Special requirements for DC or AC electronic control gear for LED modules (IEC 61347-2-13:2006, 1DT) GB 24819-2009 LED modules for general lighting - Safety requirements (IEC 62031; 2008, IDT) GB/T 24824-2009 Test Methods for LED Modules for General Lighting GB/T 24825-2009 DC or AC Electronic Control Devices and Performance Requirements for LED Modules (IEC 62384:2006MOD) EN 12464-1:2011 Lighting and Lighting in Workplace Part 1: Indoor Workplace 3 Terms and Definitions GB7000.1, GB 19510.14, GB 24819, and GB/T 24825, as well as the following terms and definitions, apply to this document. 3.1 LED Luminaire is designed to use LED light sources. Note: The definition of a lamp can be found in 1.2.1.3.2 of GB 7000.1 for integral LED luminaires. The interior of an integral LED luminaire contains LED light sources and all additional components necessary for the start and stable operation of the light source. Unless permanently damaged, the lamp cannot be disassembled. Note 1: Luminaires using LED lights are usually detachable and replaceable, and do not belong to integrated LED lighting fixtures. Note 2: Integral LED lighting fixtures include lighting fixtures where both LED light sources and LED control devices cannot be dismantled. Lighting fixtures where LED light sources cannot be dismantled and lighting fixtures where control devices for LED modules cannot be dismantled
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China