This part of GB/T 5171 specifies the general technical requirements for small power motors. This section is applicable to motors with a maximum continuous rated power not exceeding 1.1kW when converted to 1500 r/min. This section also applies to single-phase asynchronous motors with powers other than those mentioned above. The special requirements for each type of motor and other requirements not specified in this section should be specified in the product standards for each type of motor. The following normative references are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all modification orders) applies to this document. GB/T 321 Preferred Numbers and Series of Preferred Numbers GB 755 Rotating Electrical Machines - Rating and Performance GB/T 1032 Test Methods for Three Phase Asynchronous Motors GB/T 1311 Test Methods for DC Motors GB/T 1971 Rotating Electrical Machines - Terminal Marks and Direction of Rotation GB/T 2423.3 Environmental Testing for Electrical and Electronic Products - Part 2: Test Method: Test Cabs: Constant Damp Heat Test GB/T 2423.4 Environmental Testing for Electrical and Electronic Products - Part 2; Test method: Test Db; Alternating Damp Heat (12 h+12 h Cycle) GB/T 2829 Cycle Inspection Sampling Procedures and Tables (Applicable to Process Stability Inspection) GB/T 2900.25 Electrotechnical Terminology Rotating Electrical Machines GB/T 2900.27 Electrotechnical Terminology Small Power Electric Motors GB 4343.1 Requirements for Electromagnetic Compatibility of Household Appliances, Electric Tools, and Similar Appliances, Part 1; Emission GB 4706.1 Safety of Household and Similar Electrical Appliances Part 1: General Requirements GB/T4798.1 Environmental Conditions for the Application of Electrical and Electronic Products Part 1: Storage GB/T 4798.2 Environmental Conditions for the Application of Electrical and Electronic Products Part 2: Transport GB/T4942.1 Protection Level of Rotating Electrical Machines (IP Code) Graded GB/T 8128 Test Methods for Single-phase Series Excitation Motors GB/T 9651 Test Methods for Single-phase Asynchronous Motors GB 10068 Measurement of Mechanical Vibration and Vibration of Motors with a Shaft Center Height of 56 mm and Above Evaluation and Limits GB/T 10069.1 Methods and Limits for the Measurement of Noise from Rotating Electrical Machines - Part 1: Methods for the Measurement of Noise from Rotating Electrical Machines - GB 12350 Safety Requirements for Small Power Motors - GB/T 12665 Damp Heat Test Requirements for Electric Machines Used under General Environmental Conditions - GB/T 13126 General Technical Conditions for Wet and Protective Packaging of Mechanical and Electrical Products - GB/T13384 General Technical Conditions for Packaging of Mechanical and Electrical Products - GB14536.1 Automatic Electrical Controllers for Household and Similar Purposes - Part 1: General Requirements GB/T 17626.2 Electromagnetic Compatibility Testing and Measurement Techniques - Electrostatic Discharge Immunity Test GB/T 17626.4 Electromagnetic Compatibility Testing and Measurement Techniques, Electrical Fast Transient Pulse Group Immunity Test GB/T 17626.5- Electromagnetic Compatibility Testing and Measurement Techniques - Surge (Impact) Immunity Test GB/T 19142 General Rules for Export Commodity Packaging
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China