This standard specifies the test items, equipment, and methods for single-phase series excited motors. This standard applies to single-phase series excited motors. 2 Normative References: The clauses in the following documents become the clauses of this standard through the reference surface of this standard. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this standard. GB/T 2423.3-2006 Environmental Testing for Electrical and Electronic Products - Part 2: Test Methods - Test Cabs: Constant Damp Heat Test (IEC 60068-2-78:2001, 1DT) GB 3883.1-2005 Safety of Handheld Electric Tools - Part 1: General Requirements (IEC 60745-1:2003, IDT) GB 4343.1-2003 Electromagnetic Compatibility for Household Appliances Requirements for electric tools and similar appliances - Part 1: Emission (CISPR14-1: 2000.1DT) GB/T 4942.1-2006 Classification of protection levels (IP codes) for the overall structure of rotating electrical machines (IEC 60034-5:2000, IDT) GB/T 5171-2002 General technical conditions for small power motors - GB/T 10069.1-2006 Methods and limits for measuring noise emitted by rotating electrical machines - Part 1: Methods for measuring noise emitted by rotating electrical machines (ISO 1680-1: 1999, MOD) GB/T 12113-2003 Measurement Methods for Contact Current and Protective Conductor Current (IEC 609901999, IDT) GB/T 12665-1990 Requirements for Damp Heat Testing of Electrical Machines under General Environmental Conditions JB/T 8157-1999 General Technical Conditions for Small Power Single Phase Series Excitation Motors JB/T 9615.1-2000 Test Methods for Interturn Insulation of Stray and Embedded Windings in AC Low Voltage Motors JB/T 9615.2-2000 Test Limits for Interturn Insulation of Stray and Embedded Windings in AC Low Voltage Motors JB/T10490-2004 Measurement Methods for Mechanical Vibration and Vibration of Small Power Motors Evaluation and limit value 3 test items: The type inspection and factory inspection test items of single-phase series excited motors should comply with the provisions of GB/T 5171-2002, JB/T 8157-1999 and various single-phase series excited motor product standards. Any inspection items, test methods, and requirements not specified in this standard should be supplemented in the product standards for various single-phase series excited motors (hereinafter referred to as motors)
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China