This section specifies the requirements for RF coaxial cable components (consisting of cables and connectors) that transmit transverse electromagnetic wave modes (TEM), and also specifies general requirements for testing the electrical, mechanical, and environmental characteristics of coaxial cable components. Additional requirements related to specific types of cable components are given in the corresponding sub specifications. Note 1. The design of the cables and connectors used should first comply with the applicable parts of IEC 61196 and IEC 61169, respectively. Note 2r: This section does not include the tests usually conducted separately on cables and connectors. The tests conducted separately on cables and connectors have been specified in the applicable parts of IEC 61196 and IEC 61169, respectively. Note 3: Even if the cables and connectors used in cable components are not specified in the IEC 61196 and IEC 61169 series standards, wherever possible, they should be tested according to the test methods given in the relevant general specifications. Note 4: When additional protection is applied to cable components, the mechanical and environmental tests specified in this section also apply. The following normative references are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all modification orders) applies to this document. GB/T 2423.3-2006 Environmental Testing of Electrical, Industrial and Electronic Products, Part; Test Method Test Cab: Constant Damp Heat Test (IEC 60068-2-78:2001, IDT) GB/T 2423.5-1995 Environmental Testing for Electrical and Electronic Products Part 2: Test Methods: Test Ea and Guidelines: Impact (IEC 60068-2-27:1987,1DT) GB/T 2423.6-1995 Environmental Testing for Electrical and Electronic Products Part 2; Test Method Test Eb and Guidelines: Collision (IEC 60068-2-29:1987, IDT) GB/T 2423.10-2008 Environmental Testing for Electrical and Electronic Products - Part 2: Test Method: Test Fc: Vibration (Sine) (IEC 60068-2-6; 1995, IDT) GB/T 2423.17-2008 Environmental Testing for Electrical and Electronic Products - Part 2: Test Ka: Salt Spray (IEC 60068-2-11: 1981,1DT) GB/T 2423.22-2002 Environmental Testing for Electrical and Electronic Products, Part 2: Test Methods: Test N: Temperature Change (IEC 60068-2-14:1984, IDT) GB/T 2423.37-2006 Environmental Testing for Electrical and Electronic Products, Part 2: Test Methods, Test L: Sand and Dust Test (IEC 60068-2-68; 1994, IDT) GB/T 5095.5-1997 Electromechanical Components for Electronic Equipment, Basic Test Procedures and Measurement Methods - Part 5: Impact Test (Free Components) Static Load Test (Fixed Components) Life testing and overload testing (IEC 60512-5; 1992, IDT) GB/T 11313.1-2013 Radio frequency connectors - Part 1: General specifications, general requirements, and test methods (IEC 61169-1:1998,1DT) GB/T 19000-2008 Quality management systems - Fundamentals and terminology (ISO 9000:2005,1DT) GB/T 19001-2008 Quality management system requirements (ISO 9001:2008, IDT)
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China