Testing standards:

GB4706.1-1998 Safety of household and similar electrical appliances - Part 1: General requirements (eqv IEC 60335-11991) GB 5013 Rubber insulated cables with rated voltages of 450/750 V and below (idt IEC 60245) GB 5023 PVC insulated cables with rated voltages of 450/750 V and below (idt IEC 60227) GB/T 5169.5-1997 Fire hazard testing for electrical and electronic products - Part 2: Test methods, Part 2; Needle Flame Test (idtIEC 60695-2-2:1991) GB/T 5169.11-1997 Fire Hazard Testing for Electrical and Electronic Products, Test Method: Glow Wire Test and Guidelines for Finished Products (idtIEC 60695-2-1/1:1994) GB/T 7153-2002 Direct Heated Step Type Positive Temperature Coefficient Thermistors - Part I: General Specification (IEC 60738-1; 1998, IDT) GB/T 7154.1-2003 Direct Heated Step Type Positive Temperature Coefficient Thermistors: Part 1-1: Blank Detail Specification for Current Limiting - Assessment Level EZ (IEC 60738-1-1:1998, IDT) GB 8898-2001 Safety Requirements for Audio, Video, and Similar Electronic Equipment (eqv IEC 60065:1998) GB 9254-1998 Radio Disturbance Limits and Measurement Methods for Information Technology Equipment (CISPR 22:1997, IDT) GB 9364 Small Fuses (IEC 60127, IDT) GB 13140.3-1998 Connecting Devices for Low Voltage Circuits for Household and Similar Purposes, Part 2: Special Requirements for Connecting Devices with Unthreaded Clamping Elements as Independent Units Idt 1EC 60998-2-2:1991) GB 13539.1-2002 Low Voltage Fuses - Part 1: Basic Requirements (IEC 60269-11998, IDT) GB/T 13539.2-2002 Low Voltage Fuses - Part 2: Supplementary Requirements for Fuses Used by Professional Personnel (Fuses Mainly Used in Industry) (IEC 60269-2:1986, IDT) GB 13539.3-1999 Low Voltage Fuses - Part 3: Supplementary Requirements for Fuses Used by Unskilled Personnel (Fuses Mainly Used for Household and Similar Purposes) (idt 1EC 60269-3:1987). GB/T 13539.5-1999 Low voltage fuses. Part 3: Supplementary requirements for fuses used by unskilled personnel (mainly for household and similar purposes). Examples of standardized fuses (idt IEC 60269-3-1; 1994) GB/T 13539.6-2002 Low voltage fuses. Part 2: Supplementary requirements for fuses used by full-time personnel (mainly for industrial use). Parts 1-5: Examples of standardized fuses (IEC 60269-2-1:2000, IDT) GB/T 14472-1998 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification: Fixed capacitors for suppression of electromagnetic interference from power sources (idt IEC 60384-14:1993) GB/T 14579-1993 Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed capacitors with metallized polypropylene film dielectric for AC and pulse (idt IEC 60384-17:1993) GB 15092.1-2000 Switch for appliances - Part 1: General requirements (IEC 61058-1:1996, IDT) GB/T 16935,1-1997 Insulation Coordination for Equipment within Low Voltage Systems - Part 1: Principles, Requirements, and Tests (idt IEC60664-1:1992) GB/T 16935.3-2003 Insulation Coordination for Equipment within Low Voltage Systems - Part 3: Application of Coatings, Tank sealing and mold pressing for anti fouling protection (IEC 60664-3:1992, IDT) GB/T 17194-1997 Electrical conduits: Outer diameter of conduits for electrical installation and threads of conduits and accessories (eqv IEC 60423; 1993) GB 17196-1997 Connecting devices, flat quick connect terminals for connecting copper conductors, safety requirements (idt IEC 61210.1993) GB 17625.1-2003 Electromagnetic compatibility - Limits, harmonic current emission limits (equipment input current ≤ 16 A per phase) (IEC 61000-3-2:2001, IDT) GB 17625.2-1999 Electromagnetic Compatibility, Limits, Limitations on Voltage Fluctuations and Flashing Caused by Equipment with a Rated Current of Not More than 16 A in Low Voltage Power Supply Systems (IDT IEC 61000-3-3; 1994)