Electronics
Household and similar electrical appliances - Air conditioners (safety) testing
Household and similar electrical appliances - Air conditioners (safety) testing
Click here for online message:
Drop us a line
Service@Baijiantest.Com
Household and similar electrical appliances - Air conditioners (safety) testing

This chapter of GB 4706.1-2005 is replaced by the following: This part of GB 4706 specifies the safety of appliances for household and similar purposes that recover refrigerants from air conditioning and refrigeration equipment. This section applies to the safety of electrical appliances that recover and/or regenerate refrigerants from air conditioners and refrigeration equipment, equipped with open or fully enclosed motor-compressor drives. The maximum rated voltage of single-phase appliances does not exceed 250 V, and the rated voltage of other appliances does not exceed 60o V. Appliances that are not intended for general household use but may still pose a risk to the public also fall within the scope of this section, such as those intended for use by non professionals in shops, light industries, and farms. The above appliances may consist of components produced by one or multiple factories. If multiple components are provided and these individual components are to be used together, the technical requirements of this section should be based on the use of assembled components. Note 10l: The definition of "fully enclosed motor compressor" is given in IEC 60335-2-34. Note 102: The requirements for refrigeration appliances refer to the standard GB 9237. Note 103: For appliances with combustible refrigerants, additional requirements are under consideration. Note 104: Pay attention to the following situations: - For equipment intended for use on vehicles, ships, or aircraft, additional requirements may be required; -—— For instruments that need to withstand pressure, additional requirements may be required; - - The health department, labor protection department, and water supply and similar departments may also have additional requirements. Note 105: This section does not apply to: - appliances specifically designed for industrial use--- Prepare for use in special environments where corrosive or explosive gases (dust, steam, or gas) are often generated. 2 Normative References: The clauses in the following documents are referred to in this part of GB4706 and become the clauses of this part. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions do not apply to this section. However, parties to agreements based on this section are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this section. This chapter of GB 4706.1-2005, in addition to the following content, Applicable to all: Add: GB/T 5013 (all parts) Rubber insulated cables with rated voltage of 450/750 V and below [IEC 60245 (all parts), IDTJGB 8898-2001 Safety requirements for audio, video and similar electronic equipment (eqv IEC 60065:1998) GB 9364 (all parts) Small fuses [IEC 60127 (all parts), IDT] GB 9237 Safety requirements for mechanical refrigeration systems for refrigeration and heating (GB 9237-200l, eqv ISO 5149:1993) IEC 60335-2-34:2002 Safety of household and similar electrical appliances - Part 2-34: Special requirements for electric motors - Compressor units

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

Baijian and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China