Scope GB 17465.1 applies after the following modifications are made to this chapter. This section applies to: - appliance couplers for AC bipolar irreversible insertion under cold conditions with a waterproof grade higher than IPX0, used on AC power supplies with a rated voltage not exceeding 250 V, a rated current not exceeding 10 A, and a frequency of 50 Hz or 60 Hz. Used to connect circular cross-section power cords to Class II appliances used in household, commercial, and lighting industries. Note 1: This note in GB 17465.1 applies. Note 2: This note in GB 17465.1 applies. Note 3: This note in GB 17465.1 applies. Note 4: This note in GB 17465.1 does not apply. Note 5: This note in GB 17465.1 applies. Add a note: Note 6: GB 4208 specifies the protection level against harmful water ingress; Note 7: IEC 60536 specifies the classification of equipment. 2 Normative References: The clauses in the following documents are referred to in this part of GB17465 and become the clauses of this part. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions do not apply to this section. However, parties to agreements based on this section are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this section. Chapter 2 of GB 17465.1 applies and adds the following reference documents: GB 4208 Degrees of Protection Provided by Enclosures (IP Code) (GB 4208-2008, IEC 605292001, IDT) 3 Terms and Definitions GB17465.1 This chapter applies and adds the following definitions: 3.101 Plug connector is used for appliance input sockets fixed to flexible cables or cables on equipment. 3.102 Accessible surface of an accessory: When the accessory is used under normal conditions or under the following conditions: a) For connectors: do not plug in the mating electrical accessory, but the opening position is covered; b) For plug connectors and appliance input sockets: plug in the mating electrical accessory to the most unfavorable extent, causing electrical contact between the contacts (pins and sleeves). Use the test finger shown in Figure 10 of GB 17465.1 to reach the surface of the accessory
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China