This standard specifies the classification and marking of safety belts, technical requirements, inspection rules, and markings. This standard applies to safety harnesses used in high-altitude operations, climbing, and suspension operations. This standard is applicable to users who have a weight and a total load not exceeding 100 kg. This standard does not apply to seat belts for sports, fire protection, and other purposes. The clauses in the following documents are referred to as provisions of this standard through normative references. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this standard. GB/T 6096-2009 Safety Belt Test Method 3 Terms and Definitions The following terms and definitions apply to this standard. 3.1 Personal fall protection systems are personal protective equipment used to prevent high-altitude workers from falling or to hang them safely after a fall occurs. Note: The general composition of seat belts can be found in Appendix A. 3.2 Work positioning systems for pole work are safety belts that bind the human body to the vicinity of a fixed structure through ropes or straps surrounding it, allowing the operator's hands to perform other operations. Note: The example diagram is shown in Figure A.1 in Appendix A. 3.3 Zone Restriction Safety Belt Restraint Systems are safety belts used to limit the range of activity of workers and prevent them from reaching areas where falling may occur. Note: The example diagram is shown in Figure A.2 in Appendix A. 3.4 Fall arrest systems are safety harnesses that are used to hang workers when they fall during high-altitude operations or climbers. Note: An example diagram of a fall arrest harness can be found in Figure A.3 in Appendix A. 3.5 Lanyard is a rope (strap, wire rope) used to connect the lanyard to the hanging point in the safety belt
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China