This chapter of the scope GB/T16915.1-2014 applies after the following modifications: replaces the first sentence: This part of GB/T 16915 specifies the technical requirements for the classification, marking, mechanical performance, electrical performance, and other aspects of electromagnetic remote control switches. This section applies to electromagnetic remote control switches (RCS) for household and similar fixed electrical devices used indoors or outdoors, with a rated voltage not exceeding 440 V and a rated current not exceeding 63A. The coils of this type of RCS can be permanently or non permanently energized. The electronic remote control switch is within the range of GB/T 16915.2. RCS that only includes passive components such as resistors, capacitors, positive temperature coefficient (PTC) components, negative temperature coefficient (NTC) components, and printed circuit boards is not considered an electronic remote control switch. The contactor is not within the scope of this section. The following normative references are essential for the application of this document. For all dated reference documents, only the version of Cheng Gongbang is applicable to this article. There is no identification result. For undated references, the latest version (including all modification orders) applies to this document. GB/T 16915,1-2014 Switches for household and similar fixed electrical installations: Part 1: General requirements (IEC 60669-1:2007, MOD) This chapter applies with the following modifications. Add: GB/T 4026 Basic and Safety Rules for Marking and Identification of Human Machine Interface, Identification of Equipment Terminals and Conductor Terminals (GB/T 4026-2010, IEC 60445:2006, 1DT) GB/T 6109.1-2008 Enameled Round Winding Wires: Part 1: General Provisions (IEC 60317-0-1:2005, IDT) GB/T 11021 Electrical Insulation, Heat Resistance and Representation Methods (GB/T 11021-2014, IEC 600852007, IDT) GB/T16842-2016 Test Fixtures for Testing the Protection of Enclosures against Persons and Equipment GB/T 16915,2 Switches for Fixed Electrical Installations for Household and Similar Purposes: Part 2-1: Special Requirements for Electronic Switches [GB/T 16915.2-2012, IEC 60669-2-1:2009 (Ed 4.1), MOD] GB/T 19212.7 Transformers, Reactors, and Devices with a Power Supply Voltage of 1100V and Below Safety of power supply units and similar products - Part 7: Special requirements and tests for safety isolation transformers and power supply units with built-in safety isolation transformers (GB/T 19212.7-2012, IEC 61558-2-6; 2009, 1DT)
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China