1.1 Scope This specification applies to solid and non solid electrolyte aluminum capacitors. This capacitor is mainly used in DC circuits in electronic devices. It includes long-life capacitors and general-purpose capacitors. Additional requirements are required for special purpose capacitors. 1.2 Purpose: The purpose of this specification is to specify optimal ratings and characteristics for this type of capacitor, and to select the quality evaluation procedure, various testing and measurement methods, and provide general performance requirements applicable to this type of capacitor from GB/T 2693-2001 "Fixed Capacitors for Electronic Equipment, Part 1: General Specification". The test severity and requirements referenced in this sub specification in the detailed specification should have the same or higher performance level, as reducing the performance level is not allowed. 1.3 References: The clauses in the following documents become provisions of this specification through reference in this specification. At the time of publication of this specification, all versions are valid. All standards will be revised, and parties who have reached agreements based on this specification in GB/T 2693 are encouraged to study whether the latest versions of the following documents can be used. Both IEC and ISO member countries hold current valid versions. GB/T 2691-1994 Marking Codes for Resistors and Capacitors (idt lEC 60062:1992) GB/T2471-1995 Series of Preferred Numbers for Resistors and Capacitors (idt IEC 600631963 (All Specifications)) GB/T 2693-2001 Fixed Capacitors for Use in Electronic Equipment - Part 1: General Specification (idt IEC 60384; 1999) IEC 60068 Environmental Testing IEC 60410:1973 Sampling Schemes and Procedures for Count Inspection IEC Q 001:1981 IEC Quality Assessment System for Electronic Components (IECQ) Basic regulations IEC QC 001002:1981 IEC Electronic Component Quality Assessment System (IECQ) Procedure Rules ISO 3:1973 Priority Number - Priority Number System Note: Except for IEC 60068, which must use the version specified in the general specification and test clauses, all other relevant documents shall use the current version
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China