
This chapter in the scope GB4706.1-2005 is replaced by the following content: This part of GB 4706 relates to the safety of commercial microwave ovens with a cavity door. For single-phase appliances connected to a phase line and a neutral line, the rated voltage shall not exceed 250 V, and for other appliances, it shall not exceed 480 V. This section applies to the safety of modular microwave ovens with a cavity door, and its requirements include Appendix AA. This section also applies to the safety of commercial microwave ovens without chamber doors, where food or beverages enter the chamber for heating through transportation devices. The requirements include Appendix BB. The microwave oven applicable to Appendix BB, whose microwave load should enter the furnace chamber through a transport device; Appendix BB also applies to the requirements for tunnel type microwave ovens and several types of microwave vending machines. This section also applies to microwave ovens intended for use on ships, and its requirements include Appendix EE. Note 101: For microwave ovens without cavity doors and with transport devices described in Appendix BB, all provisions of this section apply to such microwave ovens, unless otherwise specified in Appendix BB. This section considers ordinary personnel in the vending machine clearance area. Note 102: This device may be embedded in vending machines, in which case GB4706.72-2008 (IEC 60335-2-75) can also apply. Note 103: Instruments using non electric energy sources are within the scope of this section. This section usually does not consider the following situations: - the use of equipment by unattended young children and people with disabilities-- The situation of children playing with tools. This section considers the use of microwave ovens with transport devices without chamber doors by ordinary personnel, unless these individuals are near the entrance or exit of the appliance. Note 104: The principle of specific microwave leakage conditions and the measurement of related microwave energy are limited to the open structure described in Appendix BB. Note 105. The following situations should be noted: - For appliances intended for exclusive use on vehicles, ships, or aircraft, additional requirements may be required—— For appliances specifically designed for use in tropical countries, special requirements may be required; - In many countries, additional requirements stipulated by national health, labor protection, and other similar authorities should also be considered; - In many countries, the additional requirements of BB.22.119.1 are formulated by national authorities—— Labor protection and similar authorities need to bear responsibility. Note 106: This does not apply to: - Household microwave ovens include combination type microwave ovens (GB 4706.21-2008); - Industrial microwave heating equipment (GB 5959.6-2008); - Medical appliances (GB 9706.6-2007); 3- Appliances intended for use in special environments where corrosive or explosive gases (such as steam or combustible gas) often occur P>
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China