This part of GB 19510 specifies the special requirements for starting devices (excluding glow starters and triggers) for fluorescent lamps and other discharge lamps using AC power sources below 1000 V at 50 Hz or 60 Hz. This starting device can generate a starting pulse of no more than 100 kV and be used together with lamps and ballasts specified in standards such as IEC 60081, IEC 60188, IEC 60192, IEC 60662, IEC 60901, IEC 61167, GB 18774, GB 16843, GB 19510.9.GB 19510.10. This section does not apply to glow starters, starting devices installed in discharge lamps, or manually operated starting devices. The requirements for preheating transformers for fluorescent lamps are given in GB 19510.9. Note: See GB 20550 for glow starters and GB/T 19655 for performance requirements 2 Normative References: The clauses in the following documents are referred to in this part of GB 19510 and become the clauses of this part. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions do not apply to this section. However, parties to agreements based on this section are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this section. This part adopts the reference standards mentioned in Chapter 2 of GB 19510.1-2009, as well as the following reference standards: GB/T 311.6-2005 High Voltage Measurement Standard Air Gap (IEC 60052; 2002. IDT) GB/T 2423.55-2006 Environmental Testing for Electrical and Electronic Products - Part 2: Environmental Testing, Test Eh; Hammer impact test (IEC 60068-2-75:1997.1DT) GB/T 14598.15-1998 Electrical relays - Part 8: Electrothermal relays (idt IEC 60255-81990) GB 16843 Safety requirements for single ended fluorescent lamps (GB 16843-2008, IEC 611991999, IDT) GB 18774 Safety requirements for double ended fluorescent lamps (GB 18774-2002, idt IEC 611951999) GB 19510.1-2009 Lamp control devices, Part 1: General and safety requirements (IEC 61347-1:2007, IDT) GB 20550 Glow starter for fluorescent lamps (GB 20550-2006-IEC 60155; 1993. IDT) IEC 60188 High pressure mercury lamps IEC 60192 Low pressure sodium lamps IEC 60662 High pressure sodium lamps IEC 61167 Metal halide lamps ISO 3864 Safety colors and safety signs
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China