1.1 Scope: This part of GB 7000 specifies the safety requirements for portable universal lighting fixtures with a power supply voltage not exceeding 250 V as the light source, except for hand lamps. This section should be used in conjunction with the relevant chapters and clauses of GB 7000.1. 1.2 Normative References: The clauses in the following documents are referred to in this part of GB7000 and become the clauses of this part. For dated reference documents, all subsequent amendments (excluding corrected content) or revisions do not apply to this section. However, parties to agreements based on this section are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest version applies to this section. GB 4208 Degrees of Protection Provided by Enclosures (IP Code) (GB 4208-2008. IEC 60529:2001, IDT) 2 General Test Requirements Application of GB 7000.1 Part О Chapter provisions. The tests required in GB 7000.1 should be carried out in the order specified in this section. 3. Apply the definitions in Chapter 1 of GB 7000.1 and the following content. 3.1 Candlestick Luminaires is a movable light fixture with light bulbs connected in series, fixed and dispersed on freely standing shelves. Note: Candlestick lamps may use E5 or E10 lamp holders. The classification of portable lighting fixtures shall be in accordance with the provisions of Chapter 2 of GB7000.1. However, portable lighting fixtures placed directly on the ground or table during use shall be classified as suitable for direct installation on ordinary combustible material surfaces. The 5 markings shall comply with the provisions of Chapter 3 of GB 7000.1. 6. The structure shall comply with Chapter 4 of GB 7000.1 and the provisions of 6.1 to 6.5 below. 6.1 For portable lighting fixtures, the insulation layer of the flexible cable and cord should not be damaged when moving, adjusting, or placing the fixture on a support. Conformity is subject to visual inspection. 6.2 During normal movement of lamps, all wiring that may cause friction with metal parts and become unsafe must be fixed with wire carriers, clamps, or similar devices made of insulating materials
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China