Service Details Service Evaluation ->

The water purifier removes chemical pollutants such as particles, sediment, chlorine, mercury, viruses, and bacteria from the water. However, although water purifiers can effectively filter out pollutants in water, they can also remove beneficial minerals such as calcium, magnesium, and sodium. For water purifiers exported to the European Union, CE certification is required! This article provides a detailed introduction to the CE certification of water purifiers

Understand the basic requirements for water purifiers

Each directive specifies the legal requirements of the European Union to ensure compliance of your products.

. These instructions are officially referred to as "basic requirements" in the instructions. These requirements are essentially very general. These instructions do not specify how to design products in a way that meets basic requirements. Determining the applicable directives for the product is the most important step in the entire CE marking process. A product is usually constrained by multiple instructions. However, manufacturers are not allowed to CE mark products for both safety directives at the same time. Once the EU directives applicable to your product are determined, as a manufacturer or importer, it is your responsibility to prove that the product meets the requirements of these directives. By following unified standards and complying with requirements and technical specifications, this can be easily achieved. When the product meets the relevant requirements in the coordinated standards, it is granted a presumption of conformity. Therefore, if all requirements of the standard are met, all requirements of the corresponding EU directives are also met

The CE marking process includes the following steps:

1. Identify the applicable EU directives

2. Select standards

3. Notification body

4. CE mark testing

5. Technical documents

6. Declaration of conformity

7. Mark/label the product

The CE mark/label of the water purifier

After successfully passing the CE certification process, as a manufacturer/importer, you need to affix the CE mark. The CE mark must be visible on the product (if the product itself does not have sufficient space, it should also be visible on the packaging). This marking, along with the declaration of conformity, proves that the product meets the requirements of the applicable CE directive

The CE label stipulates that the CE marking must include the letter "CE" in the design.

If the CE mark is reduced or enlarged, the scale shown in the figure will be maintained The CE mark must be clearly visible on the product If it is not possible to add the CE mark to the product itself (due to size or design), the CE mark can be affixed to the packaging and accompanying documents The marking must be durable in order to resist external factors The height of different components (letters) of the CE mark should be approximately equal and not less than 5 mm If a designated institution needs to participate in the CE marking process, its identification number needs to be included in the CE marking

The above article is a partial list. For more testing needs and details, please consult the online consultant of the free consulting agency: 15201733840 (phone and WeChat), and conduct testing on the top 100 inspection websites. Issuing authoritative testing reports has legal effect