All technical content in this section is mandatory. This part is a part of the National Standard for GB7000 Luminaires. There are currently 23 parts of GB7000. As of the date of publication of this part, the published GB7000 standard is divided into the following parts: - Luminaires Part 1: General Requirements and Tests (GB7000.1-2007); -—— Luminaires - Part 2-22: Special requirements - Emergency lighting fixtures (GB7000.2-2008); -—— Luminaires - Part 2-10: Special requirements - Portable luminaires for children (GB7000.4-2007); -—— Luminaires - Part 2-6: Special requirements - Luminaires with built-in tungsten filament lamp transformers or converters (GB7000.6-2008); -—— Safety Requirements for Projection Luminaires (GB7000.7-2005); -—— Luminaires - Part 2-20: Special requirements - Lamp strings (GB7000.9-2008); -—— Safety Requirements for Surface Temperature Limiting Luminaires (GB7000.17-2003); -—— Safety requirements for ultra-low voltage lighting systems for tungsten filament lamps (GB7000.18-2003); -—— Safety requirements for lighting fixtures for photography and cinematography (non professional use) (GB7000.19-2005); -—— Luminaires - Part 2-1: Special requirements - Fixed universal luminaires (GB7000.201-2008); -—— Luminaires - Part 2-2: Special requirements - Embedded luminaires (GB7000.202-2008); -—— Luminaires - Part 2-3: Special requirements - Road and street lighting fixtures (GB7000.203-2013); -—— Luminaires - Part 2-4: Special requirements - Portable universal luminaires (GB7000.204-2008); -—— Luminaires - Part 2-7: Special requirements - Portable luminaires for garden use (GB7000.207-2008); -—— Luminaires - Part 2-8: Special requirements - Hand lamps (GB7000.208-2008); -—— Luminaires - Part 2-11: Special requirements - Aquarium luminaires (GB7000.211-2008); -—— Luminaires - Part 2-12: Special requirements for night lights installed with power sockets (GB7000.212-2008); -—— Luminaires - Part 2-13: Special requirements - Floor mounted luminaires (GB7000.213-2008); -—— Luminaires - Part 2-14: Special requirements for lamps using cold cathode tube discharge lamps (neon lamps) and similar equipment (GB7000.214-2014); -—— Luminaires - Part 2-17: Special requirements - Luminaires for stage lighting, television, film and photography venues (indoor and outdoor) (GB7000.217-2008); -—— Luminaires - Part 2-18: Special requirements - Luminaires for swimming pools and similar places (GB7000.218-2008); -—— Luminaires - Part 2-19: Special requirements for ventilated luminaires (GB7000.219-2008); -—— Luminaires - Part 2-25: Special requirements - Luminaires for clinics in hospitals and rehabilitation buildings (GB7000.225-2008). This section is part 2-14 of GB7000. This section is drafted in accordance with the rules given in GB/T1.1-2009. The translation method used in this section is equivalent to IEC60598-2-14:2009 "Luminaires - Part 2-14: Special requirements for lamps using cold cathode tube discharge lamps (neon lamps) and similar equipment". The Chinese documents that correspond to the normative references in this section are as follows: - GB4208-2008 Degrees of Protection Provided by Enclosures (IP Code) (IEC60529:2001, IDT) - GB/T5465.1-2009 Graphical Symbols for Electrical Equipment - Part 1: Overview and Classification (IEC60417DB:2007, MOD) - GB/T5465.2-2008 Graphical Symbols for Electrical Equipment - Part 2: Graphical Symbols (IEC60417DB:2007, IDT) This section is proposed by the China Light Industry Federation. This part is under the jurisdiction of the Lighting Sub Technical Committee of the National Lighting Appliance Standardization Technical Committee (SAC/TC224/SC2). Drafting units for this part: Shanghai Times Light Lighting Electrical Appliances Testing Co., Ltd., National Lamp Quality Supervision and Inspection Center, National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Hangzhou Hongyan Electrical Appliances Co., Ltd., National Lamp Quality Supervision and Inspection Center (Zhongshan), Dongguan Quality Supervision and Inspection Center in Guangdong Province, and Changzhou Product Quality Supervision and Inspection Institute. The main drafters of this section are Shi Xiaohong, Yu Zaidao, Liu Erli, Yang Guoxian, Yang Yue, Lu Shiming, Zhao Xu, Zhang Xinguang, Peng Zhenjian, Li Benliang, Shi Chaoyang, and Li Weijun
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China