All technical content in this section is mandatory. The GB7000 series standard currently has 22 parts, and by the date of publication of this part, The published GB7000 series standards are as follows: GB7000.1-2007 Luminaires Part 1: General Requirements and Tests GB7000.2-2008 Luminaires Part 2-22: Special Requirements Emergency Lighting Luminaires GB7000.4-2007 Luminaires Part 2-10: Special Requirements Portable Luminaires for Children GB7000.5-2005 Safety requirements for road and street lighting fixtures GB7000.6-2008 Luminaires Part 2-6: Special requirements for luminaires with built-in tungsten filament lamp transformers or converters GB7000.7-2005 Safety requirements for projection luminaires GB7000.9-2008 Luminaires Part 2-20: Special requirements for lamp strings GB7000.17-2003 Restricted surfaces Safety requirements for temperature lamps GB7000.18-2003 Safety requirements for ultra-low voltage lighting systems for tungsten filament lamps GB7000.19-2005 Luminaires for photography and cinematography (non professional use) Safety requirements GB7000.201-2008 Luminaires Part 2-1: Special requirements Fixed universal luminaires GB7000.202-2008 Luminaires Part 2-2: Special requirements Embedded luminaires GB7000.204-2008 Luminaires Part 2-4: Special requirements Portable universal luminaires GB7000.207-2008 Luminaires Part 2-7: Special requirements Portable lighting fixtures for garden use GB7000.208-2008 Lighting fixtures Part 2-8: Special requirements Portable lighting fixtures GB7000.211-2008 Lighting fixtures Part 2-11: Special requirements Aquarium lighting fixtures GB7000.212-2008 Lighting fixtures Part 2-12: Special requirements Nighttime installation of power sockets Luminaires GB7000.213-2008- Part 2-13: Special requirements - Floor mounted luminaires GB7000.217-2008- Part 2-17: Special requirements - Stage lighting, television Film and photography venues (indoor and outdoor) Lighting fixtures GB7000.218-2008- Part 2-18: Special requirements - Lighting fixtures for swimming pools and similar places GB7000.219-2008- Part 2-19: Special requirements - Ventilated lighting fixtures GB7000.225-2008- Part 2-25: Special requirements: Lighting fixtures for hospitals and rehabilitation buildings - This part is GB Part 2-7 of 7000 "Luminaires". This section should be used in conjunction with GB7000.1. This part is equivalent to IEC60598-2-7:1982 "Luminaires - Part 2-7: Special requirements for garden portable luminaires" [including Amendment 1 (1987) and Amendment 2 (1994)]. For ease of use, the following editorial modifications have been made to this section: - Regarding the applicable light sources, they have been changed to be consistent with IEC60598-1, that is, the original tungsten filament lamps, tubular fluorescent lamps, and other gas discharge lamps have been changed to electric light sources (Chapter 1); -—— Change IEC60083 to the relevant Chinese standard GB1002 (6.6); -—— Regarding the power sockets installed on Class I lighting fixtures, the IEC60598-2-7 requirement that "power sockets installed on Class I lighting fixtures are only allowed to be connected to Class I and II lighting fixtures" should be changed to "power sockets installed on Class I lighting fixtures are only allowed to be connected to Class I lighting fixtures" (6.6). This section replaces GB7000.3-1996 "Safety Requirements for Portable Luminaires Used in Gardens". The main technical differences between this part and GB7000.3-1996 are as follows: - - Added the requirement for marking, that is, the maximum power calculated from the maximum rated current of the power line (5.1) should be marked on the lamp; -—— Regarding the connection between sockets and corresponding plugs for power supply to other lighting fixtures, it is stipulated that the dust and water resistance levels should reach at least IP53 (6.6); -—— Removed 10.3 from the original standard regarding restrictions on the use of flat plugs; -—— The standard number of this part has been changed from GB7000.3 to GB7000.207. This section is proposed by the China Light Industry Federation. This part is under the jurisdiction of the Lighting Standardization Subcommittee of the National Lighting Appliance Standardization Technical Committee. The main drafting units of this section are the National Lamp Quality Supervision and Inspection Center, the National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Shanghai Times Light Lighting Electrical Testing Co., Ltd., and Zhejiang Sunshine Group Co., Ltd. The main drafters of this section are Ling Li, Shi Xiaohong, Chen Chaozhong, Guan Yong, Chen Jiong, Wang Yin, Lu Peiguang, Chen Weiguo, and Zhu Zhan. The previous versions of the standards replaced by this section have been released: GB7000.3-1996