This part of GB/T 11017 specifies the test methods and requirements for cross-linked polyethylene insulated power cable systems, cable bodies, and their accessory bodies for fixed installation with a rated voltage of 110 kV (Um=126 kV). This section applies to single core cables and their accessories used under normal installation and operation conditions, but does not apply to cables and their accessories used under special conditions, such as submarine cables. For these special purpose cables and accessories, it may be necessary to modify the tests in this section or set some special test conditions. This section does not include transition joints for connecting cross-linked polyethylene insulated cables and paper insulated cables. The following normative references are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all modification orders) applies to this document. GB/T 2951.11-2008 General Test Methods for Insulation and Sheath Materials of Electric and Optical Cables - Part 11: General Test Methods - Measurement of Thickness and Boundary Dimensions - Mechanical Performance Testing (IEC 60811-1-1:2001, IDT) GB/T 2951.12-2008 General Test Methods for Insulation and Sheath Materials of Electric and Optical Cables - Part 12: General Test Methods - Thermal Aging Test Method (IEC 60811-1-2:2000, IDT) GB/T 2951.13-2008 General Test Methods for Insulation and Sheath Materials of Electric and Optical Cables - Part 13: General Test Methods - Density Determination Methods - Water Absorption Test - Shrinkage Test (IEC 60811-1:3:2001, IDT) GB/T 2951.14-2008 General Test Methods for Insulation and Sheath Materials of Electric and Optical Cables: Part 14: General Test Methods - Low Temperature Test (IEC 60811-1-4:1985,1DT) GB/T 2951.21-2008 General Test Methods for Insulation and Sheath Materials of Electric and Optical Cables: Part 2-1: Special Test Methods for Elastomeric Mixtures - Ozone Resistance Test - Hot Elongation Test - Mineral Oil Immersion Test (IEC 60811-2-1:2001, IDT) GB/T 2951.31-2008 General Test Methods for Insulation and Sheath Materials of Electric and Optical Cables: Part 31: Special Test Methods for PVC Mixtures - High Temperature Pressure Test - Resistance to Cracking Test (IEC 60811-3-1:1985, IDT) GB/T 2951.32-2008 General test methods for insulation and sheath materials of electric and optical cables: Part 32: Specific test methods for polyvinyl chloride mixtures - Weight loss test - Thermal stability test (IEC 60811-3-2:1985, IDT) GB/T 2951.41-2008 General Test Methods for Insulation and Sheath Materials of Electric and Optical Cables - Part 41: Specific Test Methods for Polyethylene and Polypropylene Mixtures - Environmental Stress Cracking Resistance Test - Melt Index Measurement Method - Direct Combustion Method for Measuring Carbon Black and/or Mineral Filler Content in Polyethylene - Thermogravimetric Analysis (TGA) for Measuring Carbon Black Content - Microscopic Evaluation of Carbon Black Dispersion in Polyethylene (IEC 60811-4-1:2004, IDT) GB/T 3048.12 Electrical Performance Test Methods for Electric Wires and Cables - Part 12: Partial Discharge Test (GB/T 3048.12-2007, IEC 60885-3:1988, MOD) GB/T 3048.13 Electrical Performance Test Methods for Electric Wires and Cables - Part 13: Impulse Voltage Test (GB/T 3048.13-2007, IEC 60060-1:1989, MOD)
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China