This section applies to the safety of laser radiation for laser products with a wavelength range of 180 nm~1 mm A laser product can be a single laser with or without an independent power supply, or a complex optical, electrical, or mechanical system equipped with one or more lasers. Laser products are generally used for demonstration of physical and optical phenomena, material processing, data readout and storage, information transmission and display, etc. These systems have been used in industries, commerce, entertainment, research, education, medicine, and consumer products Laser products sold to other manufacturers for commercial use as system components may not comply with this section, as the final product itself will be subject to this section. However, if the laser system in the laser product is an operable device after separation from the device, then the removed unit should comply with the requirements of this section Note 1: Operational equipment does not require tools to be prepared for its operation If the manufacturer produces laser products according to the classification in Chapters 3, 8, and 9, it is not necessary to consider the requirements of this section, indicating that the emission level of the laser product does not exceed the achievable emission limit (ALE) of Class 1 under all working, maintenance, repair, and fault conditions Note 2: The exemption mentioned above is to ensure that originally safe laser products are not subject to standard constraints In addition to the hazards caused by laser radiation, laser equipment can also cause other injuries, such as fire and electric shock Note 3: However, the classification and other requirements in this section only address the hazards of laser radiation to the eyes and skin, and other hazards are not included in the scope of this section This section explains the minimum requirements. Compliance with this section may not be sufficient to achieve the required level of product safety. Laser products must meet the performance and testing requirements that are compatible with the corresponding product safety standards
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBaijian and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China