Whether the bearings of the industrial dehydrator equipment are damaged or excessively worn, and whether the fit between the inner and outer rings and the shaft and shell is loose; Clean all lubrication parts carefully and replace the lubricating grease. The main lubrication parts of the dehydrator include the upper and lower bearings of the main shaft, clutch bearings, swing rod spherical washers, and the flat head shaft of the braking device; Whether the sealing gaskets of the industrial dehydrator are aged or deteriorated, resulting in leakage; Whether the friction plates of the brake device and clutch of the industrial dehydrator are worn, and whether the triangular belt is worn or stretched; Check whether the connecting parts of the dehydrator are loose or corroded, and whether the lining layer is broken; Check if the swing rod, spring, and spherical washer of the industrial dehydrator are damaged or stuck; Transferring soy sauce is the main working part of industrial dehydrators. We should check whether the rotary soy sauce is deformed or corroded, especially the corrosion condition of the longitudinal weld seam. If there is obvious thinning or black honeycomb like microporous structure of the weld seam, obvious cracks at the interface between the weld seam and the base material, and there is no metallic sound when knocking on the weld seam, it should be immediately stopped from use

Industrial dewatering machines should undergo corresponding preventive inspections within 4-5 months to eliminate potential malfunctions, ensure normal mechanical operation, and extend service life.

Industrial dewatering machine manufacturers use centrifugal force to operate equipment at high speed. During long-term use, they should promptly check whether all parts of the machine are normal and undamaged, and replace them if necessary to prevent unsafe accidents.

The water washing series equipment includes: fully automatic industrial washing machines, horizontal washing machines, industrial dewatering machines, etc; The drying series equipment includes: steam dryer, electric heating dryer, gas fired dryer, etc; The equipment of the dry cleaning machine series includes: tetrachloroethylene dry cleaning machine, industrial petroleum dry cleaning machine, carbon dioxide dry cleaning machine, liquid carbon dioxide dry cleaning machine, etc; The ironing series equipment includes: universal clamp machine, portrait ironing machine, steam ironing machine, electric heating ironing machine, etc; Folding equipment includes: folding machine, feeding machine, and spreading machine; The final equipment includes: dehumidifier, stain removal table, steam boiler, air compressor, sorting table, linen cart, air pump, etc