The testing range and equipment of IEC 60598-1 for children's lighting fixtures: IEC 60598-1 testing range: IEC 60598-1 and EN 60598-1 testing specify the general requirements for lighting fixtures, including electric light sources with power supply voltages up to 1000 V. The requirements and related tests of IEC 60598-1 include classification, marking, mechanical structure, electrical structure, and photobiosafety. Each section of this Part 1 should be read in conjunction with Section 0 and other relevant chapters. Each part of IEC 60598-2 specifies the requirements for specific types of lamps or groups of lamps with a power supply voltage not exceeding 1000 V. These sections are issued separately for ease of revision and additional chapters are added when necessary. The International Commission on Illumination (CIE) is considering the representation of luminaire photometric data and is therefore not included in Part 1. This requirement applies to lamps with built-in igniters in ballasts and lamps with igniters separated from ballasts. For lamps with built-in igniters, their requirements are under consideration. The requirements for semi lighting fixtures are included in Part 1. Generally speaking, this Part 1 covers the safety requirements for lighting fixtures. The purpose of this Part 1 is to provide a set of requirements and tests that are typically applicable to most types of lamps and can be invoked in accordance with the detailed specifications of IEC 60598-2. Therefore, Part 1 itself is not considered a specification for any type of lamp, and its provisions only apply to specific types of lamps as determined by the appropriate parts of IEC 60598-2. When referring to any chapter of Part 1, each part of IEC 60598-2 specifies the scope of application of that chapter and the order in which tests are carried out; They also include necessary additional requirements. The numbering order of each section in Part 1 has no special significance, as its prescribed application order is determined by the corresponding parts of IEC 60598-2 and applies to each type of lamp or lamp group. All parts of IEC 60598-2 are independent and therefore do not include references to other parts of IEC 60598-2. If the requirements of any section of Part 1 are referenced in IEC 60598-2, the phrase 'the requirements of Section... of IEC 60598-1 apply' should be interpreted as meaning that all requirements of this section of Part 1 apply, except for those that are clearly not applicable to specific types of lamps covered by this part of IEC 60598-2. For explosion-proof lamps covered by IEC 60079, in addition to the requirements of IEC 60079, the requirements of IEC 60598 (select appropriate Part 2) also apply. If there is any conflict between IEC 60598 and IEC 60079, the requirements of IEC 60079 shall prevail. Attention should be paid to the performance standards of lighting fixtures that include "lighting design information"; This should be followed in order to operate the lights correctly; However, this standard does not require lamp performance testing as part of lamp type test certification. Considering that the latest security improvements have been incorporated into the standards and are constantly being revised and revised. Regional standardization agencies may include declarations in their derived standards to cover products that comply with previous documents indicated by manufacturers or standardization agencies. The declaration may require that for such products, the previous standards may continue to apply to production until the specified date when the new standards apply