In order to effectively improve the eye environment for students, promote their healthy growth, and ensure that the lighting of primary and secondary school classrooms in the province meets 100% national standards by the end of 2023, the Baijian and testing reflects social responsibility, actively carry out the construction of classroom lighting testing qualifications and capabilities, and carry out classroom lighting acceptance work. What are the relevant standards for classroom lighting and lighting? Let the Baijian test take everyone to learn it now

Ordinary classrooms in primary and secondary schools shall comply with the "GB/T18205-2012  Comprehensive Evaluation of School Hygiene", "GB7793-2010 Hygienic Standards for Lighting and Lighting in Primary and Secondary School Classrooms", "GB50099-2011 Design Code for Primary and Secondary Schools", and "JGJ3102013 Electrical Design Code for Educational Buildings" GB/T36876-2018 Hygienic Requirements for Lighting Design and Installation of Ordinary Classrooms in Primary and Secondary Schools, GB50034-2013 Architectural Lighting Design Standard, and local standards in various provinces and cities, as well as Guangdong Province's local standard DB44/T 2335-2021 Technical Specification for Lighting in Primary and Secondary School Classrooms. Shanghai local standard "DB31/T 539-2020 Lighting Design Specification for Classrooms in Primary and Secondary Schools and Kindergartens" Student dormitories, libraries (reading rooms), functional classrooms, etc. shall be implemented in an orderly manner in accordance with the requirements of GB50099-2011 and GB50034-2013, and in accordance with the classroom lighting standards plan Classroom lighting equipment renovation project: Based on the standard installation of classroom lighting fixtures, scientifically and reasonably determine the renovation method of classroom lighting equipment. The installation of classroom lighting fixtures is not standardized, and if the average illumination, color temperature of the light source, flicker, glare, etc. of the classroom desk and blackboard lighting do not meet the standards, standardized installation and transformation should be carried out in accordance with relevant standards; If the uniformity does not meet the standard, the position of the lighting fixtures should be adjusted in a standardized manner to ensure that the lighting renovation acceptance of each school classroom meets the requirements of all mandatory and recommended clauses such as the "GB7793-2010 Hygienic Standards for Lighting and Lighting in Primary and Secondary School Classrooms" Classroom Lighting Acceptance Specification

Schools should select one of the classrooms to be renovated for sample room construction. After the renovation, a qualified third-party testing agency at the provincial or municipal level will conduct on-site testing according to the specifications. After passing the testing, other classrooms can be renovated. After all the renovations are completed, the school must entrust a testing institution with the same qualification as the pilot classroom to randomly select 5% -10% of representative types of classrooms (the tested pilot classrooms can be included in the calculation) for on-site acceptance, and at least one classroom of each type should be ensured. The lighting of newly built, expanded, and renovated classrooms should also be inspected and accepted in accordance with the above requirements