Electronics
Navigation light detection
Navigation light detection
Click here for online message:
Drop us a line
Service@Baijiantest.Com
Navigation light detection

Navigation lights refer to a set of signal lights installed on an aircraft to determine the direction of flight for mutual detection by air traffic during flight. It is stipulated that the aircraft should be equipped with navigation lights on its two wing tips, and the left wing tip should have a red light and the right wing tip should have a green light. Traditionally, it also includes the installation of white lights at the tail end of aircraft. During flight, it must be engaged. Navigation lights are used to detect and determine the direction of taxiing on the ground at night, and to determine the spacing to prevent wing tip collisions. General regulations: Install red lights on the left wing tip of the aircraft, green lights on the right wing tip, and white lights on the tail wing end; A red light is installed on the left side of the helicopter fuselage, a green light is installed on the right side, a white light is installed at the tail end, and a red light is installed at the rotor tip. Install red lights on the port side of the ship, green lights on the starboard side, and white lights on the mast and stern; Installing side lights on non motorized vessels; The wooden sailboat is only equipped with a white light

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

Baijian and testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Testing and testing characteristics:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China